LEARN
MORE
Savor™ M1100™
Bluetooth® Headset
CONNECT TO YOUR PHONE
PLT_M1100
“Pairing” connects your
headset to your phone.
“Multipoint” technology
lets you use this headset
with two phones.
1. READY
2. SET
3. CONNECT
Activate the Bluetooth feature on
your phone, then use the phone’s
settings to add/search/discover
new Bluetooth devices.
First Time:
With headset turned off, activate
Bluetooth pairing mode by sliding phone.
Power switch on. The LED flashes
blue/red to indicate pairing mode.
Select “PLT_M1100” from the list of
Bluetooth devices shown on your
If phone asks for a passcode, enter
four zeros (0000). You may see
**** on screen.
iPhone:
Settings > General >
Bluetooth > On
Pairing New Phone/
Reconnecting Original:
Turn on the headset then press
and hold the Call button until the
LED flashes blue/red.
Some phones also ask to confirm
headset connection after pairing.
(starts the search for devices)
BlackBerry® smartphone:
Settings/options >
Bluetooth: On >
Headset LED will stop flashing
blue/red once your phone and
headset are successfully paired/
connected.
Search for devices
VIDEO TUTORIAL IN USA:
FIND YOUR GROOVE
The loop of the gel eartip tucks into the back curve of
your ear for a stable fit.
Try on the headset. The eartip is positioned to suit most
people, but you may want to rotate it to best fit your left
or right ear.
The gel eartip and speaker click into matching grooves
so the eartip doesn’t move out of place during use.
For Left Ear
The loop on the gel eartip should point away from the
headset. (Do not rotate the eartip too far.)
For Right Ear
MIX AND MATCH FOR BEST FIT
If the gel eartip feels loose or tight in
your ear, then change it. To replace the
medium gel eartip for small or large,
Using your thumb, tuck the bottom of
the eartip over the speaker and pull
the loop of the eartip over the speaker.
For best voice pickup, always check that
the headset points towards the corner
of your mouth.
pull the loop of the gel eartip to remove (Don’t push the speaker through the gel
it. (Don’t pull on the speaker base and
stem.)
eartip.)
Optional earloop shown
VIDEO TUTORIAL:
MORE ABOUT MULTIPOINT
Plantronics M1100 supports multipoint How to Initiate a Call
How to Answer a Call While Talking
technology, which allows you to use one
headset with two different Bluetooth
mobile phones.
When multipoint is in use, the headset on the Other Paired Phone
controls, initiates or redials a call from
the phone that last made an outgoing
call.
To answer a second call on the
other phone, the current call must
be terminated or transferred back
to the first phone. To transfer the
call, see “Take a Good Look.”
To pair your headset to a second phone,
see “Connect to Your Phone.”
To use the second paired phone in-
stead, make the call using the controls
on that phone. The second phone acti-
vates its link with the headset.
If you choose not to answer, the
second call will go to voice mail.
NOTE: The headset cannot place a cur-
rent call on hold while answering a call
from the second phone.
Answering an incoming call from
the second phone, while already
on another call:
1. Before answering the second
call, end the first call by tapping
the Call button.
2. Answer the second call by tapping
the Call button again.
TIP To avoid issues with multipoint,
use the Call button on the headset
rather than your phone controls.
LISTEN TO THE VOICE
WHAT YOU’LL HEAR
Power On
WHEN YOU’LL HEAR IT
This headset whispers various status
alerts when you power on/off, run low
on talk time, or lose/reconnect the
Bluetooth connection to your phone.
After sliding the Power switch to “on” position
After sliding the Power switch to “off” position
After sliding the Power switch to “on” position
Power Off
Talk Time: (4 hrs, 3 hrs,
2 hrs, Less than 2 hours)
Battery Low
When you have approximately 30 minutes left before
the battery must be recharged
Recharge Headset
Phone 1 Connected
When you have approximately 15 minutes left before
the battery must be recharged
After sliding the Power switch to “on” position or recon-
necting a dropped Bluetooth connection
Phone 2 Connected
Pairing
After pairing a second phone using multipoint feature
While the headset and phone are trying to pair/connect
Pairing Successful
After the headset and phone are successfully paired/
connected
Pairing Incomplete,
Restart Headset
After the headset and phone tried to pair but failed
Volume Maximum
When the highest volume level is reached after tapping
Volume button
Mute On
Mute Off
After pressing Volume button for 1 second during a call
When on mute, after pressing Volume button
for 1 second
Lost Connection
Cancelled
When the phone loses the Bluetooth connection with
the headset
After saying “cancel” to stop a voice command
VOICE COMMANDS
You can give your headset a
command, and it will whisper
the answer or do what you say.
Know How to Control the Headset:
First tap the VR Button then say:
• What Can I Say?
• Pair Mode
• Am I Connected?
• Check Battery
• Redial
• Cancel
• Call Information (USA only; dials
Bing 411™)
If your command is not recognized
by the headset, you may hear a help-
ful prompt like “Always remember the
“What Can I Say?” command for
a list of active commands”.
• Call Vocalyst™ (USA only)
• Answer (no need to tap VR first)
• Ignore (no need to tap VR first)
TIPS
Pair/Connect Just Once:
Listen To Music But Don’t Miss a Call:
This headset supports Bluetooth A2DP
audio streaming to let you hear mu-
sic, internet radio, podcasts and even
turn-by-turn directions from your
A2DP-enabled phone. Use your phone
to start the music or audio and it will
automatically transfer to your headset.
Stay Near Your Phone:
Pairing is a one-time process unless
your phone loses the connection or
you want to pair a new phone.
Bluetooth has a working “range” of
up to 33 feet between the phone and
headset before audio degrades and
the connection is lost.
Know How to Reconnect:
Your headset tries to reconnect a lost
connection. If it can’t, then tap the Call
button once or manually reconnect via
the phone’s Bluetooth device menu.
Sound Your Best:
For best voice pickup, always check
that the headset points towards the
corner of your mouth.
If your phone rings, your streaming
audio will mute to allow you to answer
or ignore the incoming call then auto-
matically resume playback. Audio will
also pause when you use the headset
voice commands but will only resume
playing if you did not make an outgo-
ing call.
Continue a Call Without the Headset:
If you need to continue a call without
using your headset, just press the Call
button for 1 second and the call trans-
fers back to your phone. You will hear
a tone to confirm the transfer.
SPECIFICATIONS
Talk Time
Up to 4 hours
Up to 7 Days
Standby Time
Operating Distance (Range)
Headset Weight
Up to 33 feet (10 meters), Class II
9 grams
Headset Dimensions
Charge Connector
Battery Type
55 x 16 x 12 mm
Micro USB charging
Rechargeable non-replaceable lithium ion polymer
Less than 2 hours
Charge Time (Maximum)
Power Requirements
Bluetooth Version
Bluetooth Profiles
5V DC – 180 mA
2.1 specifications with EDR and eSCO
Advanced Audio Distribution (A2DP), Hands-Free (HFP)
Profile 1.5, Headset (HSP) Profile 1.1 and Secure Simple
Pairing (SSP)
Operating, Storage and
Charging Temperature
32°F - 104°F (0°C - 40°C)
NEED MORE HELP?
Phone support in USA:
1-866-363-BLUE (2583)
FAQs:
1-year limited warranty details:
© 2011 Plantronics, Inc. All Rights Reserved. Plantronics, M1100, Savor and Vocalyst are
trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and
logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics,
Inc. is under license. iPhone is a trademark of Apple Inc. registered in the U.S. and other
countries. Blackberry is owned by Research In Motion Limited and is registered in the
United States and may be pending or registered in other countries. Plantronics, Inc is
not endorsed, sponsored, affiliated with or otherwise authorized by Research In Motion
Limited. Bing is a trademark of Microsoft Corporation in the US and other countries.
Patents US 5,712,453; Patents Pending AM84446-01 (03/11)
Z109
N10687
|