VT926801
QuickStart Guide
DIGITAL MODEL 2004
OLYMPUS AMERICA INC.
Olympus Europa GmbH
Wendenstrasse 14-18,
20097 Hamburg, Germany
Two Corporate Center Drive, Melville,
NY 11747-3157, U.S.A.
UNPACKING THE BOX CONTENTS
Gather your digital camera and the parts as shown in the illustration. You’ll need these to complete the steps for the camera set-up
procedures that follow.
START HERE
It is strongly recommended that you follow these
step-by-step numbered instructions to set up and
quickly begin using your new Digital Camera.
*2
Lithium-ion battery (LI-20B)
AC adapter (D-7AC)
CAMEDIA Master CD-ROM
/
*1
Cradle
Reference Manual
Software installation guide
Digital camera
Strap
For more detailed instructions on advanced features,
*1
xD-Picture Card/Instructions
please refer to the Reference Manual
.
USB cable
AV cable
*1 Reference Manual is provided on CD-ROM in some
areas.
The following items are also included in this package: lens cap, lens cap string, camera case (with camera cleaning cloth), warranty card and registration card (not
pvovided in some areas).
*1 Reference Manual is provided on CD-ROM in some areas.
*2 The instruction manual included on the CAMEDIA Master 4.2 CD-ROM is provided in English only.
PREPARE THE CAMERA FOR USE
Charging the battery
b.
c.
Before you begin using your Olympus digital camera…
blinks during charging.
To the AC wall outlet
AC plug
Cradle (provided)
Loading the battery
a.
Monitor
Lift up the cover
firmly on the
to close. Closing the battery/card
compartment cover locks the latch.
and push down
6
3
Slide the battery/card compartment Gently push the latch backwards to lift it
.
section of the cover
7
cover in the direction of the arrow
When you take your finger off the latch, the
1
4
. The cover unlocks and opens in latch drops back on its own
. After the
2
the direction of the arrow
.
latch drops back, insert the battery
.
5
DC-IN jack
AC adapter (provided)
Close the battery/
card compartment
cover.
Inserting the card
Open the battery/card
compartment cover.
Release the latch
to insert the battery.
3
1
1
7
5
4
6
3
2
2
4
Battery/Card
compartment cover
5
Latch
Notch
Unloading the battery
● Insert the card while keeping it
straight.
Removing the card
3
4
Release the latch
. With the
Push the card all the way to
unlock it, then let it return
slowly. Hold the card straight
and pull it out.
3
Insert the battery with the
OLYMPUS logo face up.
battery held down, tilt the camera
carefully so that the battery does
not drop from the camera.
● When the card is inserted
all the way, it stops with a click.
4
5
Remove the battery 5 .
Names of parts
Shutter button
Microphone
Flash
Connector end
Control dial
Lens
Cradle connector
BACK/NEXT button
Zoom button
(W
Monitor
MENU/OK button
/T
)
Mode switch
Battery/Card compartment
cover
(
/
/
)
DC-IN jack
Cradle
(provided)
Strap eyelet
POWER switch
Tripod socket
A/V OUT jack
USB connector
Speaker
Self-timer lamp
TURNING ON THE CAMERA
Set the date.
3) Select
from the SETUP menu.
The “year” is highlighted. The first two digits of the
year are fixed.
Indicates there are more menu items
following SHUTTER SOUND.
2
Power on/off
a.
Mode switch
Rotate to
select
: Select this for still pictures shooting.
SETUP
: Select this for movie shooting.
: Select this for playback.
Rotate to
1
01 01
REC VIEW
select
ON
ENGLISH
1
Lens cap
Remove this when taking
pictures.
Press to confirm
SCREEN
SET
00 00
SHUTTER SOUND
1
BACK
CANCEL
SELECT
GO OK
BACK
MENU/OK
EXIT
SELECT
GO OK
Currently selected item
Repeat the procedure until the date and
time are completely set.
The time is displayed in the 24-hour format.
For example, 2 p.m. will be displayed as 14:00.
Rotate to
select
SETUP
’04.01.01
00:00
PAL
3
Rotate to
select
VIDEO OUT
POWER switch
Turns the camera on and off.
* Check the date/time settings
when the camera is turned on.
Monitor
Press to confirm
MENU/OK
Power on T Turns on the monitor.
07 30
Power off T Turns off the monitor.
BACK
EXIT
SELECT
GO OK
Press to confirm
SET
12 00
BACK
CANCEL
SELECT
GO OK
4) Set the date/time.
Menu & operation (date and time setting)
b.
MENU/OK
The following instructions show the procedure used when the
date and time settings are set to Y-M-D.
5) With the cursor on SET, press MENU/OK.
1) Display the menu.
2) Select SETUP.
Select the date format: [Y-M-D (Year/Month/Day)],
[M-D-Y (Month/Day/Year)], [D-M-Y (Day/Month/Year)].
The clock starts after completing step 5 .
The current setting is displayed.
Rotate to
select
Rotate to
select
P
P
P
SPOT
OFF
SCENE SELECT
RESET
AF MODE
Press to confirm
07 30
Press
2004 01 01
AUTO
OFF
FLASH MODE
FORMAT
SETUP
Y
M
D
SET
12 15
MENU/OK
Press to confirm
MENU/OK
Press to confirm
MENU/OK
MENU/OK
SET
00 00
SH
3M
BACK
CANCEL
GO OK
BACK
BACK
BACK
CANCEL
SELECT
GO OK
EXIT
SELECT
GO OK
EXIT
SELECT
GO OK
The operation guide is displayed.
Printed in Japan
|