MPD8802
User’s Guide
Personal Compact Disc
MP3 Player
Before operating this product,
please read these instructions completely.
SAFETY PRECAUTIONS (CONTINUED)
INFORMATION:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much
heat.
• Placed lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE:
We
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
WantYou
LISTENING
ForALifetime
100
120
140
180
Rocket launching pad
EIA
EST. 1924
Information courtesy of the Deafness Research Foundation.
3
LOCATION OF CONTROLS
MAIN UNIT
1 2
3 4 5
6
7
8
9
10 11 12 13
14
15
16
10. LINE OUT Jack (Side of Unit)
11. PHONES Jack (Side of Unit)
12. VOLUME Control (Side of Unit)
13. DBBS (Bass Boost) Switch
14. CD Compartment
15. CD Door Open Switch
16. Battery Compartment (Bottom
of Unit)
1. Skip (o) Button
2. Skip (n) Button
3. PROG. Button
4. Display
5. ESP/ALBUM Button
6. MODE Button
7. DC 4.5V Jack (Rear of Unit)
+
–
8. PLAY/PAUSE (®p)/POWER
ON Button
9. STOP (I)/POWER OFF
Button
4
POWER SOURCES
This CD player requires either two (2) “AA” cell standard batteries (not
included) or an AC adapter (not included).
BATTERY INSTALLATION
“
” will light in the display when batteries are
low (when using battery power).
1. Open the battery compartment door on the
bottom of the unit by sliding it out and then
lifting it. To prevent the possibility of losing
the cover, it cannot be removed.
2. Insert two (2) “AA” cell batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are recommended for the
longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V, 60Hz AC only. Plug the small end
into the DC 4.5V jack on the rear of the unit and connect the other end
into the AC outlet. The batteries are automatically disconnected when the
AC adapter is used.
DC4.5V
z
5
CD OPERATION
BASS BOOST
TURNING POWER ON/OFF
1
1
1
2
To emphasize the bass, slide the
DBBS switch to the ON position. For
normal bass, slide the DBBS switch to
the OFF position.
Press the PLAY/PAUSE (®p)/POWER
ON button 1 to turn the unit on.
To turn the unit off, press the STOP
(I)/POWER OFF button ƒ. The unit
will automatically shut off if stopped (CD
Standby) for one minute.
Audio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb audio sound can
be heard through your home audio system. Before making any connections, turn
off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the
amplifier’s PHONO jack.)
NOTE: If the unit interferes with TV reception, move the unit away from the TV or
turn off the power to this unit.
6
CD OPERATION (CONTINUED)
TO INSERT AND PLAY A CD
This CD player is designed to play all kinds of Audio Discs and MP3 CD
Roms, such as CD recordables and rewritables. Do not try to play CDI,
CDV, DVD or computer CDs in this unit.
1
1
2
2
Press the PLAY/PAUSE (®p)/POWER Press the PLAY/PAUSE (®p)/POWER
ON button to begin playback; the
current track and elapsed playing time
(CD information and folder will also
appear, if using MP3) will appear in the
display.
ON button 1 to turn the unit on.
Open the CD compartment lid by
sliding the CD Door OPEN switch
Gently press a disc, label side up, onto
the spindle until it locks in place. Close
the CD compartment lid.
2.
3
4
1
When the disc is through playing, it will
stop. Press the STOP (I)/POWER
OFF button to stop the disc before it is
finished. Press the STOP (I)/POWER
OFF button again to turn the unit off.
Adjust the VOLUME control 1 and
DBBS switch 2 as desired.
7
CD OPERATION (CONTINUED)
CD PLAYBACK NOTES:
• See page 15 for more information on MP3’s.
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply
record (“burn”) only one session. You can find more information in your
recorder’s manual.
• This unit is capable of playing standard CDs or 3” singles; no adapter is
required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “no disc” will
appear in the display.
• If a disc is not recorded properly, "NO CD MP3" or "No disc" will appear in the
display.
• Playback will stop when you open the CD compartment, but it is not
recommended to open the compartment before the STOP (I)/POWER OFF
button is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin
playback, depending on the number of tracks burned on the CD.
TO PAUSE A CD
2
1
During CD playback, if you wish to
pause the disc momentarily, press the
Press the PLAY/PAUSE (®p)/
POWER ON button again to release
PLAY/PAUSE (®p)/POWER ON but- pause and resume playback. The
ton. Playback stops but the disc con- sound returns and the elapsed time in
tinues to spin and the elapsed time the display stops flashing.
will blink in the display.
8
CD OPERATION (CONTINUED)
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
2
1
After you insert the disc into the CD When the desired track number (and file
number if using MP3) appears in the dis-
play, press the PLAY/PAUSE
(®p)/POWER ON button. Playback will
begin with the track (or file) you selected.
player and the total number of tracks
appear in the display, you may press
either the Skip o 1 or n 2 button to
select a specific track for playback.
FORWARD/REVERSE SKIP TRACK
1
2
During playback, press and release During playback, press and release the
the Skip n button once to advance the Skip o button once to move the player
player to the beginning of the next back to the beginning of the currently
track. Press the Skip n button repeat- playing track. Press the Skip o button
repeatedly to move the player back to
lower-numbered tracks.
edly to advance the player to higher-
numbered tracks.
9
CD OPERATION (CONTINUED)
HIGH-SPEED MUSIC SEARCH
During playback, depress and hold
either the Skip o 1 or n 2 button to
move the player forward or backward
within a track to locate a specific
musical passage. The player will
move forward or backward at high
speed as long as the buttons are
depressed. When you release the
Skip o 1 or n 2 button, normal
playback will resume.
1
2
1
REPEAT PLAYBACK OF ONE TRACK
1
2
2
1
3
To repeat a single track, while in the When the desired track number
appears in the display, press the
PLAY/PAUSE (®p)/POWER ON but-
ton to begin playback. The specific
track you selected will be repeated
continuously.
Stop mode, press the Skip o 1 or n 2
button to select the specific track that
you wish to repeat. Press the MODE
button 3 once; the Repeat indicator
will appear in the display.
To cancel Repeat 1 playback, press the MODE button four times (five times if
using an MP3 CD).
10
CD OPERATION (CONTINUED)
REPEAT PLAYBACK OF ALL TRACKS
1
2
1
2
To repeat all the tracks on the CD,
Press the PLAY/PAUSE (®p)/POWER
press the MODE button twice (three ON button 1 to begin playback. All tracks
on the disc will be repeated continuously.
To cancel Repeat playback, press the
MODE button 2 repeatedly until the mode
indicator disappears.
times if using an MP3 CD); the
Repeat All indicator will appear in the
display. (Repeat All and Album indica-
tors wiill appear in the display if using
an MP3 CD.)
REPEAT PLAYBACK OF A FOLDER (MP3 w/folders only)
1
2
1
2
2
1
To repeat all files in a directory (MP3
CD only), press the MODE button 1
twice; the Repeat and Album indica-
tors will appear in the display. Press
the ESP/ALBUM button 2 to select the
specific directory that you wish to
repeat.
Press the PLAY/PAUSE (®p)/POWER
ON button 1 to begin playback. All files in
the selected directory will be repeated
continuously. To cancel Repeat playback,
press the MODE button 2 repeatedly until
the mode indicator disappears. See page
15 for more info on MP3 format.
11
CD OPERATION (CONTINUED)
INTRO PLAYBACK (Will play the first 10 seconds of each track)
1
2
1
2
While in the Stop mode, press the
Press the PLAY/PAUSE (®p)/POWER
MODE button three times (four times ON button 1 to begin Intro playback. The
first 10 seconds of all tracks on the disc
will be played in sequence. To cancel Intro
playback, press the MODE button 2
repeatedly until the Mode indicator disap-
pears.
if an MP3 CD with multiple directories
is inserted); “INTRO” will appear in the
display.
TO RANDOMLY PLAY BACK A CD
1
2
1
2
While in the Stop mode, press the
Press the PLAY/PAUSE (®p)/POWER ON
MODE button four times (five times if button 1 to begin playback. The unit will play
an MP3 CD with multiple directories is
inserted); “RAND” will appear in the
display.
all the tracks in random order. When all the
tracks have been played, the unit will stop.
To cancel Random playback, press the
MODE button 2 once; the Mode indicator
will disappear from the display.
12
CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 64 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
1
2
2
1
While in the Stop mode, press the Select a track to be programmed using the
PROG. button. The track number will
blink and “P-01” will appear in the dis-
play.
Skip o 1 or n 2 button. If using a MP3
disc, see note below.
3
4
Press the PROG. button to memorize
the track. Repeat steps 2 and 3 to
program additional tracks up to a
maximum of 64 tracks.
Press the PLAY/PAUSE (®p)/POWER
ON button to begin program playback;
“PROG” will appear in the display.
NOTES:
•
MP3: If an MP3 CD is inserted, you will first select the directory number in
step 1 followed by the PROG. button, and then the file/track number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
13
CD OPERATION (CONTINUED)
NOTES ON PROGRAM PLAYBACK
•
You can review the program by pressing the PROG. button repeatedly
while in the Stop mode.
•
To add a track to the program memory, simply press the PROG.
button repeatedly until the track (directory for MP3) appears and “00”
blinks in the display. Then follow steps 2 and 3 on the previous page.
Press the STOP (I)/POWER OFF button to stop the program before it
is finished (the program memory will be kept).
To clear the memory, press the PROG. button while in the Stop mode,
then press the STOP (I)/POWER OFF button.
Each file may be stored in the program memory as many times as
desired (up to 64 files).
•
•
•
•
You can scroll through the program while it is playing using the Skip o
or n button.
ESP (ELECTRONIC SKIP PROTECTION)
This feature protects against loss of sound caused by vibrations and
shocks. Continuous playback is ensured once some of the music has
been stored into memory.
ESP will automatically be activated when listening to standard or MP3
CDs. You cannot deactivate ESP while listening to an MP3 CD. However,
you can deactivate it when playing a standard CD by simply pressing the
ESP/ALBUM button; the ESP indicator will disappear from the display.
Deactivating the ESP will conserve battery life.
14
CD OPERATION (CONTINUED)
MP3 FAQs–Frequently Asked Questions
Please read before playing an MP3 CD.
Does the unit support packet write CD-RW?
Yes, it can. You can add or delete MP3 files without
reformatting. It appears like a PC hard drive.
Can the unit read regular music CDs?
Yes, it can. However you can not mix MP3s and WAV files on
the same CD. If you do this your Portable MP3 CD Player will
play only the MP3 files.
Does the unit have Electronic Skip Protection built-in?
Yes, it has an anti-shock buffer (45 seconds for standard CD
and 120 seconds for MP3 CD). What it means for the
everyday user is that it can withstand road bumps, shaking,
etc. There will be no skipping when you jog or run on a tread-
mill or drive on a bumpy road.
Can I use the MP3 extension for non-audio data files?
No, this may result in serious malfunction and harmful noise
interference.
Can I mix MP3 files with other file types on the CDR?
Yes, but your Portable MP3 CD Player will ignore those files
and read only the MP3 files on the CDR.
Does the unit support multi-session CDRs?
If the MP3 CD is not finalized, you can burn a new group of
MP3 files until the CD is full.
Does the unit support subdirectories (subfolders)?
Yes, the unit can read MP3 files from subfolders.
What appears on the display when playing back MP3 CDs?
The album, title and artist (if set when MP3 was recorded).
15
CD OPERATION (CONTINUED)
ALBUM SKIP
1
When playing an MP3 disc with more
than one album, press the
ESP/ALBUM button to skip to the next
album.
16
CD OPERATION (CONTINUED)
SINGLE SESSION
The chart below is an example of a Windows Explorer display that will
appear on your computer monitor for a single session MP3 CD Rom with
directories/albums. Check the added notes to help you understand the
MP3 CD unit display and the playback sequence of directories/albums
and tracks on a single session MP3 CD.
MULTI SESSION
The computer user does not need to finalize the CDR disc as music is
burned on the CD. Because of this, the music can be downloaded at
different times until the whole CD is full.
(E) CD-ROM drive
Directory 01
Skipped
Blur01.mp3
Blur02.mp3
Blur03.mp3
Blur04.mp3
Blur.jpg
Lyric.doc
Directory 02
Directory 04
Girl09.mp3
Girl10.mp3
Spice05.mp3
Spice06.mp3
Directory 03
Directory 05
Boyz11.mp3
Boyz12.mp3
2men07.mp3
2men08.mp3
Skipped
Directory 06
Bread13.mp3
Abba01.wav
Abba02.wav
Directory 07
Marx14.mp3
Twain15.mp3
NOTES:
• The arrow pathway shows the sequence of MP3 directory and file
playback.
• This example has a total of seven MP3 directories.
• Based on this layout, the first file will be “Blur01.mp3” and the last file
will be “Twain15.mp3”.
• “Skipped” denotes a directory which contains non-audio files only, e.g.
jpg, wav, etc. These cannot be detected nor played on this player.
When an album contains mixed format files, the non-MP3 files will be
skipped.
17
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact disc only by its edges. Never allow your
fingers to come in contact with the shiny, unprinted
side of the compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to
the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
If a compact disc skips or gets stuck on a section of the compact disc, it is
probably dirty or damaged (scratched).
Z
•
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular
motions.
•
•
Compact discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures or dust, etc. Prolonged exposure or extreme temperatures can
warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink, may damage the surface.
Cleaning the Unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
18
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
CAUSE
SOLUTION
Dead batteries, or not Replace batteries, and install
turn on.
installed properly.
Weak or dead Re-
chargeable batteries.
AC adapter
not connected.
CD compartment
not closed.
properly.
Recharge or replace
batteries.
Check AC adapter
connection.
Close CD compartment.
Disc will not play.
Disc inserted
incorrectly.
Dirty or defective
disc.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
Dirty or defective
disc.
Clean or replace disc.
No sound from
headphones.
Headphone
plug not inserted
correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
ESP is not activated.
Increase volume.
Replace batteries.
Try another disc.
Press the ESP/ALBUM button.
ESP not working.
19
SPECIFICATIONS
Power Requirement DC............................2 x AA (LR6) Alkaline batteries
Power requirement AC ....................DC IN 4.5V Adapter (center positive)
Output Level (Line Out) ............................................0.6VMS (47K Ohms)
Output Level (Headphones) ..........................................16mW (32 Ohms)
MPEG Rate ............................................................................32-384Kbps
Sampling Frequency ..................................8/11.025/12KHz for MPEG2.5
16/22.05/24KHz for MPEG2
32/44.1/48KHz for MPEG1
MP3 Playback ................................................ISO9660 format compatible
Check the CD burner/recorder’s documentation to see if it complies with
these specifications.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,
PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST
90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT
TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX
INTERNATIONAL AT 1-800-321-6993.
20
|