Model VC4400 User Guide
5 Disc DVD Changer
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The open-
ings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This prod-
uct should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer’s instructions have been
adhered to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Table of Contents
Operation with Audio CD and MP3/WMA Disc . . 20-21
Playing an Audio CD and MP3/WMA Disc . . . . . 20
Notes on MP3/WMA Recordings . . . . . . . . . . . . 20
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Moving to another Track . . . . . . . . . . . . . . . 21
ꢀ Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 21
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 21
ꢀ Changing the Audio Channel . . . . . . . . . . . . 21
ꢀ Repeat Track/Disc/All/Off . . . . . . . . . . . . . . . 21
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 22
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Moving to another File . . . . . . . . . . . . . . . . . 22
ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 22
ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Notes on JPEG Recordings . . . . . . . . . . . . . 22
Programmed Playback . . . . . . . . . . . . . . . . . . . 23-24
Programmed Playback with Audio CD . . . . . . . . 23
Programmed Playback with MP3/WMA disc . . . . 23
Programmed Playback with Video CD . . . . . . . . 23
ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 24
ꢀ Erasing a Track from Program List. . . . . . . . 24
ꢀ Erasing the Complete Program List . . . . . . . 24
Additional Information . . . . . . . . . . . . . . . . . . . . . 25
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 25
Setting Remote control codes of DVD player . . . 25
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel and Display Window . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to Optional Equipment . . . . . . . . . . . 11
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-15
General Explanation. . . . . . . . . . . . . . . . . . . . . . 12
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15
ꢀ Initial Settings General Operation. . . . . . . . . 13
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 15
Operation
Operation with DVD and Video CD . . . . . . . . . 16-19
Playing a DVD and Video CD. . . . . . . . . . . . . . . 16
ꢀ Exchanging discs during playback . . . . . . . . 16
ꢀ Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Exchanging the disc and starting playback. . 16
General Features. . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Moving to another TITLE . . . . . . . . . . . . . . 17
ꢀ Moving to another CHAPTER/TRACK . . . . . 17
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Still Picture and Frame-by-Frame Playback . 17
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 19
Special DVD Features . . . . . . . . . . . . . . . . . . . . 19
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Changing the Audio Language. . . . . . . . . . . 19
ꢀ Changing the Audio Channel . . . . . . . . . . . . 19
ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 27
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 28
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Before Use
Disc-related terms
Playable Discs
Title (DVD only)
DVD
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Chapter (DVD only)
Audio CD
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(8 cm / 12 cm disc)
In addition, this unit can play a DVD-R, DVD RW,
Kodak PICTURE CD, SVCD, and CD-R or CD-RW that
contains audio titles, MP3, WMA or JPEG files.
Notes
Track (Video CD and audio CD only)
– Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD-R/ RW) disc itself,
some CD-R/RW (or DVD-R/ RW) discs cannot be
played on the unit.
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
–
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes on DVDs and Video CDs
A scene is composed of one or several tracks.
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or other functions may be added.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be played on the unit.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
for playback of region “1” encoded DVD soft-
ware. The region code on the labels of some
1
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled “1” or
“ALL”. If you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
5
Before Use (Continued)
Precautions
Notes on Discs
Handling discs
Handling the unit
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Do not stick paper or tape on the disc.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
Storing discs
To keep the exterior surfaces clean
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
Cleaning discs
To clean the cabinet
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About Symbols
For details, please contact your nearest dealer.
About the
symbol display
Remote Control Operation Range
“
” may appear on the TV screen during operation.
Point the remote control at the remote sensor and
press the buttons.
ꢀ Distance: About 16 ft (5 m) from the front of the
remote sensor.
ꢀ Angle: About 30° in each direction of the front of the
remote sensor.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
Remote control battery installation
DVD DVD
VCD2.0
VCD1.1
CD
Video CDs with the PBC (playback control)
function.
Detach the battery cover on the rear of
the remote control, and insert two R03
Video CDs without the PBC (playback control)
function.
(size AAA) batteries with
aligned correctly.
and
Audio CDs.
Caution
MP3 MP3 discs.
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
WMA discs.
JPEG discs.
WMA
JPEG
6
Front Panel and Display Window
STANDBY
Lights red when the
DVD player is standby.
Disc Tray
Insert a disc here.
Display window
Shows the current
status of the player.
/
OPEN/CLOSE (
)
Opens or closes the
disc tray.
DISC SKIP
Moves to the next
Remote Sensor
POWER
available disc tray.
ON/STANDBY
Switches the
player ON and
STANDBY.
Reverse Skip/Scan (
S
/
Q
)
Go to beginning of current
chapter/track or to PREVIOUS
chapter/track.
Press and hold for two seconds for a
fast reverse search.
Forward Skip/Scan (
R
/
T
)
Go to NEXT chapter/track.
Press and hold for two seconds for
a fast forward search.
PLAY ( 2)
Starts playback.
DISC EX-CHANGE
Changes a disc (other than the
one playing) during playback
STOP ( 9)
Stops playback.
PAUSE ( ; )
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
ANGLE Lights when multi angles are
present.
A light will appear if a disc is in the
disc tray. The current disc tray flashes.
TITLE Indicates current title number
DVD
DVD inserted
CHP/TRK Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG. Programmed playback active
CD Audio CD inserted
VCD Video CD inserted
MP3 MP3 or WMA disc inserted
RANDOM RANDOM
playback active
Indicates current player function:
Playback, Pause, etc.
Indicates repeat
mode
MP3 VCD
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
1
2
5
3
4
7
Remote Control
MARKER •
OPEN/CLOSE
Marks any point during playback.
Opens and closes the disc tray.
SEARCH •
ANGLE
Displays MARKER SEARCH menu.
Selects a DVD camera angle if
available
POWER
Switches DVD Player ON and OFF.
RANDOM
Plays tracks in random order.
AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
PROGRAM
Enters to the program edit mode or
exits from that.
SUBTITLE
Selects a subtitle language.
CLEAR
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
0-9 number buttons
Selects numbered items in a menu.
Reverse SKIP/SCAN ( S ) •
Search backward*/ go to beginning
of current chapter or track or go to
previous chapter or track.
• ZOOM
Enlarges video image.
• STOP ( 9)
Stops playback.
* Press and hold button for about
two seconds.
• PAUSE/STEP ( ;)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
PLAY ( 2) •
Starts playback.
Forward SKIP/SCAN ( T ) •
Search forward*/ go to next chap-
ter or track.
SELECT/ENTER
Acknowledges menu selection.
SLOW ( , / . )
Reverse/ Forward slow playback.
OSD
Accesses On-Screen display.
1/2/3/4 (left/right/up/down)
- Selects an item in the menu.
MENU
Accesses menu on a DVD disc.
• REPEAT
Repeat chapter, track, title all.
TOP MENU •
Displays the discs Top menu, if
available.
• A-B
Repeat sequence.
SETUP •
Accesses or removes setup menu.
• DISC SKIP
Moves to the next available disc tray.
RETURN •
- Removes the setup menu.
- Displays the menu of a video
CD with PBC.
Setting Remote control codes of Remote control
• This remote control supports two remote control codes: C004 and C044.
• When the unit is shipped from the factory, the remote control is set to C004.
• To set the remote control to C044, hold down both the STOP button and "2" number button on the remote control
for at least five seconds.
• You can change the code of remote control only when NO DISC appears in the display window.
• To set the remote control back to C004, hold down both the STOP button and "1" number button on the
remote control for at least five seconds.
• Also set the remote control codes of the player to the same setting as the remote control.
(This setting is set to C004, when the unit is shipped from the factory.) (page 25)
8
Rear Panel
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
COMPONENT VIDEO OUT (Y, CB/PB, CR/PR)
Connect to a TV with Y, CB/PB, CR/PR inputs.
AUDIO OUT1 (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
VIDEO OUT
Connect to a TV with video inputs.
AUDIO OUT2 (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
AC Power Cord
Plug into the power source.
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
9
Connections
®
Progressive Scan (Color Stream pro) connection
Tips
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible.
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
ꢀ For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment”
on page 11.
Connect the COMPONENT VIDEO OUT jacks on
1
the DVD Player to the corresponding in jacks on
the TV using an optional Y, CB/PB, CR/PR cable (C).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
Caution
–
Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Notes
– Set the Progressive to “On” on the setup menu for
progressive signal, see page 13.
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT and S-VIDEO OUT
jack). (See “Video mode setting”, page 25)
Connecting to a TV
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
Rear of TV
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
VIDEO
INPUT
AUDIO INPUT
Video connection
Connect the VIDEO OUT jack on the DVD Player to
the video in jack on the TV using the video cable (V).
Y
Pr
Pb
R
L
L
1
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using the S-Video
cable (S).
S
C
A
V
1
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
2
®
Component Video (Color Stream ) connection
Connect the COMPONENT VIDEO OUT jacks on
the DVD Player to the corresponding in jacks on
the TV using an Y, CB/PB, CR/PR cable (C).
1
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
2
Rear of DVD player
Notes
– Refer to the owner’s manual of your TV as well.
– Before you connect the DVD player to your TV, be
sure to turn off the power and unplug both units from
the wall outlet before making any connections.
Caution
–
Do not set the Digital Audio Output of this DVD player to
“Dolby Digital” unless you are connecting the DIGITAL
OUT jack of this DVD player to an AV decoder that has
the Dolby Digital decoding function. High volume sound
may damage your hearing as well as the speakers.
10
Connections (Continued)
Connecting to Optional Equipment
Rear of DVD player
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
O
X
A
Connect one of the DVD Player’s DIGITAL AUDIO
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical O or coaxial X) audio cable.
R
L
OPTICAL
COAXIAL
DIGITAL INPUT
AUDIO INPUT
You will need to activate the player’s digital output.
2
(See “Digital Audio Output” on page 14).
Amplifier (Receiver)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Notes
– Refer to the owner’s manual of your audio system as
well.
– Before you connect the DVD player to other equip-
ment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any
connections.
– If you place the DVD player near a tuner or radio, the
radio broadcast sound might be distorted. In this
case, move the DVD player away from the tuner and
radio.
– The output sound of the DVD player has a wide
dynamic range. Be sure to adjust the receiver’s vol-
ume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume
sound.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
– Turn off the receiver before you connect or disconnect
the DVD player’s power cord. If you leave the receiv-
er power on, the speakers may be damaged.
11
Before Operation
Temporary Feedback Field Icons
General Explanation
This manual gives basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
TITLE
Repeat Title
CHAPT
Repeat Chapter
TRACK
Repeat Track (non-PBC Video CDs only)
occurs, the symbol
appears on the TV screen, indi-
ALL
Repeat All Tracks (non-PBC Video CDs only)
cating that the operation is not permitted by the DVD
Player or is not available on the disc.
A
B
Repeat A-B
OFF
Repeat Off
On-Screen Display
General playback status can be displayed on the TV
Resume play from this point
Action prohibited or not available
screen. Some items can be changed on the menu.
Notes
On-screen display operation
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
Press OSD during playback.
1
Press 3/4to select an item.
2
The selected item will be highlighted.
Press 1/2to change the setting of an item.
3
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
DVD
Items
Function (Press 3/4to select desired item)
Selection Method
Title Number
Shows the current title number and total number of
1
/
2
, or
1 /3
1 /12
titles, and skips to the desired title number.
Numbers, SELECT/ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
1
/
2
, or
Numbers, SELECT/ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
0:20:09
Numbers, SELECT/ENTER
Audio language
and Digital Audio
Output mode
1 ENG
D
5.1 CH
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
/
2
, or
AUDIO
Subtitle language
Shows the current subtitles language, and
1 2
, or
SUBTITLE
/
ABC
OFF
1 /1
changes the setting.
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
1
/
2
, or
ANGLE
Sound
Shows the current sound mode (NORMAL or 3D SUR-
ROUND), and changes the setting.
1
/
2
NORM.
VCD1.1
VCD2.0
Items
Function (Press 3/4to select desired item)
Selection Method
Track Number
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1
/
2
, or
1 /4
Numbers, SELECT/ENTER
Time
Shows the elapsed playing time (Display only)
0:20:09
–
Audio Channel
Shows the audio channel, and
changes the audio channel.
1
/
2
, or
STER.
AUDIO
Sound
Shows the current sound mode (NORMAL or 3D SUR-
ROUND), and changes the setting.
1
/
2
NORM.
12
Before Operation (Continued)
Initial Settings
Picture
You can set your own Personal Preferences on the
player.
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off).
Initial Settings General Operation
Press SETUP.
The setup menu appears.
1
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
16:9 Wide: Select when a 16:9 wide TV is connected.
German
Spanish
Italian
4:3 Letterbox
Disc Audio
Rating
4:3 Panscan
Disc Subtitle
Country Code
TV Aspect
16:9 Wide
Disc Menu
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
Rating
Country Code
Hungarian
Other – – – –
TV Aspect
Menu Language
Others
Progressive Scan
Digital Audio Output
Press 3/4to select the desired item.
Others
2
The screen will show the current setting for the
selected item, as well as alternate setting(s).
Progressive Scan DVD
While the desired item is selected, press 2, then
3/4to select the desired setting.
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the DVD Player to a standard (ana-
log) television, set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
3
4
5
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
Press SETUP, RETURN, or PLAY to exit the
setup menu.
Language
Disc Language DVD
Select a language for the disc’s Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 27. If you enter the wrong language
code, press CLEAR.
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Original
English
French
Disc Audio
Others
Disc Subtitle
Disc Menu
German
Spanish
Italian
Rating
Country Code
TV Aspect
Caution
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
Once the setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is play-
ing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
Hungarian
Other – – – –
Others
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
13
Before Operation (Continued)
Sound
Others
Digital Audio Output
The DRC, Vocal, PBC and Auto Play settings can
be changed.
ꢀ Press 3/4to select the desired item and press
SELECT/ENTER. The setting of the selected item is
changed between On and Off.
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected the DVD Player’s DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected
the DVD Player’s DIGITAL OUT jack to an amplifier or
other equipment with a DTS decoder, Dolby Digital
decoder or MPEG decoder.
Disc Audio
Disc Subtitle
Disc Menu
Rating
DRC
On
On
On
Off
Vocal
PBC
Auto Play
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
Others
Dynamic Range Control (DRC) DVD
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
DOLBY
Disc Audio
Disc Subtitle
Disc Menu
Rating
DIGITAL /PCM
Stream/PCM
PCM
Country Code
Sample Freq.
48 KHz
TV Aspect
Menu Language
96KHz
Progressive Scan
Digital Audio Output
Others
Vocal DVD
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Sample Frequency
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
VCD2.0
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
Auto Play DVD
You can set up the DVD Player so a DVD disc automat-
ically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search a title that playback time is long most and then
play back the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
14
Before Operation (Continued)
Parental Control
DVD
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 28.).
Rating DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
Code Set
Disc Subtitle
Disc Menu
U
S
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
8
Disc Audio
7
Disc Subtitle
6
Disc Menu
Select Country Code using the 3/4buttons on
the setup menu.
5
Rating
1
4
Country Code
3
TV Aspect
2 While Country Code is selected, press 2.
2
Menu Language
1
Progressive Scan
Digital Audio Output
Unlock
Change
3 Follow step 3 of “Rating” on left.
Others
4 Select the first character using the 3/4buttons.
Select “Rating” on the Setup menu using the
1
3/4buttons.
Shift the cursor using 2 button and select the
5
6
second character using 3/4buttons.
2 While “Rating” is selected, press 2.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
menu.
When you have not entered a password yet.
3
Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password.
then press SELECT/ENTER. Enter the 4-digit pass-
word again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press SELECT/ENTER.
Note
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below.).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press SELECT/ENTER.
3 Select Change using 3/4buttons then press
SELECT/ENTER.
4 Enter the new 4-digit code, then press
SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Select a rating from 1 to 8 using the 3/4but-
tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
4
5 Enter exactly the same code a second time and veri-
fy by pressing SELECT/ENTER.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared. “P CLr” appears on the
display for a moment.
Enter a new code as shown above to the left (Rating).
Press SELECT/ENTER to confirm your rating
5
selection, then press SETUP to exit the menu.
3
15
Operation with DVD and Video CD
Playing a DVD and Video CD
Notes
ꢀ If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 15).
VCD2.0
VCD1.1
Playback Setup DVD
ꢀ Turn on the TV and select the video input source con-
nected to the DVD player.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the DVD player.
ꢀ DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
Press OPEN/CLOSE to open the disc tray.
1
Exchanging discs during playback
Load your chosen disc in the tray, with the
ꢀ Press DISC EX-CHANGE on the front panel during
playback to open the disc tray.
ꢀ Press DISC SKIP to rotate the disc trays to the
desired position. The carousel will rotate clockwise by
one disc increments.
2
playback side down.
Do not load a disc in the
left and light side position.
Center position
ꢀ Exchange the discs and press DISC EX-CHANGE or
OPEN/CLOSE to close the disc tray.
Note
• Discs can be loaded one at a time by pressing
DISC SKIP to rotate the carousel.
ꢀ The disc tray presently loaded in the play position can
not be exchanged.
Press OPEN/CLOSE to close the tray.
3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
Skipping discs
Press DISC SKIP during play or when playback is
stopped.
Notes
ꢀ When DISC SKIP is pressed, the disc tray rotates and
playback begins from the beginning of the next disc.
ꢀ If there is no disc on the next disc tray, the following
disc tray will be selected.
ꢀ When DISC SKIP is pressed during playback of disc
5, playback of disc 1 will start.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
DVD
Use the 1/2/3/4 buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start play-
back.
Press TOP MENU or MENU to return to the menu
screen.
Exchanging the disc and starting playback
1.Press OPEN/CLOSE during playback or when play-
back is stopped.
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2.Exchange the disc.
3.Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that was in front).
VCD2.0
ꢀ Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
ꢀ Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
14.
After operation
When the unit is not in use, remove the disc and press
POWER to turn off the DVD player.
Notes
ꢀ Do not move the DVD player during playback. Doing
so may damage the disc and the DVD player.
ꢀ Use the OPEN/CLOSE button on the remote control
or DVD player to open and close the disc tray. Do not
push the disc tray while it is moving. Doing so may
cause the DVD player to malfunction.
ꢀ Do not push up the disc tray or put any objects other
than discs on the disc tray. Doing so may cause the
DVD video player to malfunction.
Caution
–
Do not touch the loading drawer and carousel while
they are in motion, and do not attempt to rotate the
carousel by hand; doing so could result in incorrect
operation of the player and/or damage to the discs.
ꢀ Keep your fingers well clear of the disc tray as it is
closing. Be especially careful with children’s fingers
around the closing disc tray as there is a risk of
personal injury.
16
Operation with DVD and Video CD
General Features
Still Picture and Frame-by-Frame playback
VCD2.0
VCD1.1
DVD
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote con-
trol.
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
1 /3
DVD
Moving to another TITLE
VCD2.0
VCD1.1
Slow Motion DVD
When a disc has more than one title, you can move to
another title as follows:
ꢀ Press OSD, then press the appropriate numbered
button (0-9) to select a title number.
1 Press SLOW t or T during playback.
The player will enter SLOW mode.
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
Moving to another CHAPTER/TRACK
1 /12
1 /3
VCD1.1
DVD
Notes
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Slow motion playback in reverse is not applicable for
Video CD.
ꢀ Press SKIP/SCAN . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
ꢀ Press . twice briefly to step back to the previous
chapter/track.
ꢀ To go directly to any chapter/track during DVD
playback, press OSD. Then, press 3/4to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
VCD2.0
VCD1.1
Random Karaoke DVD
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM(1-3)” appears on the display window.
• RANDOM1: Plays all the tracks on a single disc in random
order and then stops.
• RANDOM2: Plays all the tracks on current disc in
random order and then plays all the tracks on each suc-
ceeding disc in random order and then stops.
Note
• RANDOM3: Plays 2 tracks randomly from a disc and then
plays 2 tracks randomly from a different disc until all
tracks on all discs have been played.
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
VCD2.0
VCD1.1
Search DVD
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
Tips
By pressing SKIP/SCAN > during Random playback,
the unit selects another title (track) and resumes
Random playback.
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
Notes
ꢀ This function only works with DVD Karaoke discs and
video CD without PBC.
3 To exit SEARCH mode, press PLAY.
ꢀ DVD karaoke works only RANDOM 1 function.
ꢀ On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See
page 14.
17
Operation with DVD and Video CD
General Features (continued)
0:20:09
-:--:--
Time Search DVD
VCD2.0
VCD1.1
Repeat A-B DVD
The Time Search function allows you to start playing at
any chosen time on the disc.
A
*
A
B
OFF
1 Press OSD during playback. The on-screen display
appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
To repeat a sequence in a title :
1 Press A-B at your chosen starting point.
“ A * ” appears briefly on the TV screen.
2 Within 10 seconds, press 3/4to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
2 Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins (“AsB” appears the display window).
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
3 To cancel the sequence, press A-B.
VCD2.0
VCD1.1
Repeat DVD
TITLE
TRACK
CHAPT
ALL
OFF
4 Within 10 seconds, press SELECT/ENTER to confirm
the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
DVD Video Discs - Repeat Chapter/Title/All/Off
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
3D SUR
NORM.
VCD2.0 VCD1.1
DVD
3D Surround
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
3
To repeat entire all disc contents, press REPEAT a third time.
The Repeat All icon appears on the TV screen.
4 To exit Repeat mode, press REPEAT a fourth time.
The Repeat Off icon appears on the TV screen.
1 Press OSD during playback.
2 Press 3 or 4 to select the sound option.
Video CDs - Repeat Track/Disc/All/Off
The sound option will be highlighted.
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
3 Press 1 or 2 to to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM”.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat Disc icon appears on the TV screen.
VCD2.0
VCD1.1
Zoom DVD
3
To repeat entire all disc contents, press REPEAT a third time.
The Repeat All icon appears on the TV screen.
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
4 To exit Repeat mode, press REPEAT a fourth time.
The Repeat Off icon appears on the TV screen.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 14.
2 Use the 1/2/3/4buttons to move through the
zoomed picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
Note
The zoom function may not work for some DVDs.
18
Operation with DVD and Video CD
General Features (continued)
DVD
Special DVD Features
VCD2.0
VCD1.1
DVD
Marker Search
Checking the contents of DVD discs:
Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1/2/3/4buttons to highlight your selection,
then press SELECT/ENTER.
MARKER SEARCH
1/9
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
Title Menu DVD
1 Press TOP MENU.
2
Repeat step 1 to enter up to nine Marker points on a disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
2 Within 10 seconds, press 1/2 to select a Marker
number that you want to recall.
3 To remove the title menu, press TOP MENU again.
3 Press SELECT/ENTER.
Playback will start from the Marked scene.
Disc Menu DVD
1 Press MENU.
The disc menu is displayed.
4 To remove the MARKER SEARCH menu, press
SEARCH.
2 To remove the disc menu, press MENU again.
To clear a Marked Scene
1 During disc playback, press SEARCH.
1 /1
DVD
The MARKER SEARCH menu will appear on the screen.
Camera Angle
2 Press 1/2 to select the Marker number that you want
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
ꢀ Press ANGLE repeatedly during playback to select a
desired angle.
4 Repeat steps 2 and 3 to erase additional Marker
The number of the current angle appears on the display.
numbers.
5 To remove the MARKER SEARCH menu, press
Changing the Audio Language
SEARCH.
1 ENG
D
5.1 CH
DVD
Press AUDIO repeatedly during playback to hear a dif-
ferent audio language or audio track.
VCD2.0
VCD1.1
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STER., LEFT or RIGHT).
ABC
1 ENG
DVD
Subtitles
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note
If
appears, the feature is not available on the disc.
19
Operation with Audio CD and MP3/WMA Disc
Notes on MP3/WMA Recordings
Playing an Audio CD and MP3/WMA Disc
About MP3
CD
MP3
WMA
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The player can not read an MP3 file that has a file
extension other than “.mp3”.
The DVD Player can play MP3/WMA formatted record-
ings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
Insert a disc and close the tray.
About WMA(Window Media Audio)
ꢀ An WMA file is a Microsoft audio compression
technology.
ꢀ WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
1
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
MP3 WMA
JPEG
Microsoft, Windows Media, and the Windows
Logo are trademarks or registered trademarks
of Microsoft Corporation in both the United
States and other countries
Press 3/4to select the MP3/WMA then press
2
SELECT/ENTER.
MP3/WMA Disc compatibility with this player is
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
limited as follows:
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
Program
MP3/WMA
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “Easy-
CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
Clear All
OFF
2
00:00
1
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
3
4
Press 3/4to select a track then press PLAY or
SELECT/ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Program
CD
1
Program
MP3/WMA
2
3
4
5
TRACK 1.mp3
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
TRACK 07
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Clear All
OFF
Clear All
NORM.
2
3
0: 56: 18
STER.
00:00
1
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
Audio CD menu
MP3/WMA menu
Tip
If you are in a file list and want to return to the Folder
list, use the 3/4to highlight and press
SELECT/ENTER to return to the previous menu screen.
Caution
–
If you record a disc using a personal computer, even if it
is recorded in a compatible format, there are cases in
which it may not play because of the settings of the
application software used to create the disc. (Check with
the software publisher for more detailed information.)
5 To stop playback at any other time, press STOP.
20
Operation with Audio CD and MP3/WMA Disc (Continued)
CD
MP3
CD
WMA
Pause
Random with Audio CD
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM(1-3)” appears on the display window.
• RANDOM1: Plays all the tracks on a single disc in random
order and then stops.
• RANDOM2: Plays all the tracks on current disc in
random order and then plays all the tracks on each suc-
ceeding disc in random order and then stops.
CD
MP3
WMA
Moving to another Track
ꢀ Press SKIP/SCAN . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
ꢀ Press SKIP/SCAN . twice briefly to step back to
the previous track.
• RANDOM3: Plays 2 tracks randomly from a disc and then
plays 2 tracks randomly from a different disc until all
tracks on all discs have been played.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
ꢀ In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
CD
Repeat A-B
CD
MP3
WMA
Search
To repeat a sequence.
1 During disc playback, press A-B at your chosen start-
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
ing point.
The Repeat icon and “ * ” appears on the menu screen.
A
2 Press A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3 To exit the sequence and return to normal play, press
A-B again.
The Repeat icon and “OFF” appears on the menu screen.
3 To exit SEARCH mode, press PLAY.
CD
3D Surround
MP3
WMA
Random with MP3/WMA Disc
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
RANDOM or “RAND.” appears on the display window
and menu screen.
1 Press OSD during playback.
2 Use 1 or 2 to select the sound option.
2 To return to normal playback, press RANDOM repeat-
edly until RANDOM or “RAND.” disappears on the
display window and menu screen.
The sound option will be highlighted.
3 Use 3 or 4 to to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM”.
MP3
WMA
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
CD
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat icon and “ALL” appears on the menu screen.
CD
Repeat Track/Disc/All/Off
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
1.To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appear on the menu screen.
2.To repeat all tracks on a disc, press REPEAT a
second time.
The Repeat icon and “DISC” appear on the menu screen.
3.To repeat entire all disc contents, press REPEAT third
time.
The Repeat icon and “All” appears on the menu screen.
4.To cancel Repeat mode, press REPEAT a fourth time.
The Repeat icon and “OFF” appear on the menu screen.
21
Operation with JPEG Disc
JPEG
Moving to another File
Viewing a JPEG disc
Press SKIP/SCAN . or > once during viewing a
This DVD Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
picture to advance to the next file or to the previous file.
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the
TV screen.
1
MP3 WMA
JPEG
To flip the picture
Press 3/4during showing a picture to flip the
picture horizontally or a vertically.
Press 3/4to select the JPEG then press
2
SELECT/ENTER.
The JPEG menu appears on the TV screen.
To rotate picture
Press 1/2 during showing a picture to rotate the
picture clockwise or counter clockwise.
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Notes on JPEG Recordings
Off
Slide Speed
ꢀ Depending upon the size and number of the JPEG
files, it could take a long time for the DVD player to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
3
ꢀ Total number of files and folders on the disc should
be less than 650.
Tip
If you are in a file list and want to return to the Folder
list, use the 34 buttons on the remote to highlight
ꢀ Some disc may be incompatible due to different
recording format or condition of disc.
“
and press SELECT/ENTER to return to the
previous menu screen.
”
ꢀ When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.jpg” extensions
when copying into the CD layout.
If you want to view a particular file, press 3/4to
highlight a file and press SELECT/ENTER or
PLAY.
4
ꢀ If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
Viewing the file proceeding starts.
During viewing a file, press RETURN to move to
the previous menu (JPEG menu).
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
ꢀ File names without “.jpg” extension will not be able to
be read by this DVD player. Even though the files are
shown as JPEG image files in windows explorer.
Folder1
JPEG
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
Caution
–
If you record a disc using a personal computer, even if it
is recorded in a compatible format, there are cases in
which it may not play because of the settings of the
application software used to create the disc. (Check with
the software publisher for more detailed information.)
5/32
1024X768 Picture5.jpg
Off
5/32
1024X768
Slide Speed
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
Speed then press 3/4 to select the option you want to
use, and press SELECT/ENTER.
To stop viewing at any other time, press STOP.
The JPEG menu appears.
5
22
VCD2.0
VCD1.1
CD
MP3
WMA
Programmed Playback
The Program function enables you to store your favorite
tracks from any disc in the player memory.
Programmed Playback with MP3/WMA
disc
Program can contain 30 tracks.
Follow step 1 of “Programmed Playback with
Audio CD ” on left.
1
Programmed Playback with Audio CD
Select a track, then press SELECT/ENTER to
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
2
3
place the selected track on the Program list.
1
E
The
mark will appear to the right of the word Program
Repeat step 2 to place additional tracks on the
Program list.
on the right side of the menu screen.
E
Program
TRACK 8.mp3
MP3/WMA
Note
TRACK 1.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Press PROGRAM to exit the Program Edit mode.
E
The
mark will disappear.
Clear All
OFF
Move to the Disc number selection column by
2
00:00
3
2
pressing 3 repeatedly.
MP3/WMA menu
3 Select an audio disc number using 1/2.
Follow steps 6-9 of “Programmed Playback with
Audio CD ” on left.
4
Select a track, then press SELECT/ENTER to
4
place the selected track on the Program list.
Programmed Playback with Video CD
Note
You must select a disc number of audio CD.
If selected track is other kind of disc (DVD or MP3 etc.),
the track skips during programmed playback.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 14.
Repeat steps 2-4 to place additional tracks on
the Program list.
Insert Video CD and close the tray.
5
1
2
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
E
CD
1
Program
3
2
4
5
2
2
1
3
TRACK 12
TRACK 08
TRACK 10
TRACK 01
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
TRACK 07
E
VCD
Program
3
1
2
4
5
2
2
3
TRACK 04
TRACK 03
TRACK 01
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
Clear All
NORM.
3
0: 56: 18
STER.
Audio CD menu
Clear All
NORM.
3
0: 56: 18
STER.
Press 2.
The programmed track you selected last is highlighted on
the program list.
6
7
Video CD menu
Press 3/4to select the track you want to start
playing.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
Note
Press RETURN or PROGRAM to exit the Program menu.
Follow steps 2-8 of “Programmed Playback with
Audio CD ” on left.
Press PLAY to start.
3
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
8
9
To resume normal playback from
programmed playback, press PROGRAM.
“PROG.” indicator disappears in the display window.
4
To resume normal playback from programmed
playback, select a track of CD list and then
press SELECT/ENTER.
“PROG.” indicator disappears on the menu screen.
23
VCD2.0
VCD1.1
CD
MP3
WMA
Programmed Playback
Repeat Programmed Tracks
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Erasing a Track from Program List
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the
Program Edit mode.
E
The
mark will appear.
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 3/4to select “Clear All”, then press
SELECT/ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
24
Additional Information
Screen Saver
Setting Remote control codes of
DVD player
The screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
• This DVD player support two remote control codes :
C004 and C044.
• When the unit is shipped from the factory, the remote
code is set to C004.
Video Mode Setting
• To set the code of the player to C044, press PAUSE
then input “9872” using number buttons.
VCD2.0
VCD1.1
DVD
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
• To set the code of the player to C004, press PAUSE
then input “9871” using number buttons.
• You can change the code of the player only when
NO DISC appears in the display window.
• Changed Remote control codes is displayed in the
Display window.
ꢀ To change the video mode, press and hold OSD
about 3 seconds during disc playback. The new video
mode number selected is displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
• Set the remote control codes of the Remote control to
the same setting (page 8).
Notes
ꢀ Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
ꢀ This setting can not be used if a disc is playing.
ꢀ If a DVD has been loaded, be sure to press STOP
twice before proceeding.
ꢀ If you turn off the power, the video mode will be back
to initial state (MODE1).
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video based
material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with compar-
atively little motion.
Note
The video mode setting only works when the Progressive
Scan mode is set to “On” in the Setup menu.
25
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
ꢀ The TV is not set to receive DVD signal ꢀ Select the appropriate video input mode
No picture.
output.
on the TV so the picture from the DVD
player appears on the TV screen.
ꢀ The video cable is not connected
ꢀ Connect the video cable securely.
securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive DVD
signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
ꢀ The audio cables are not connected
ꢀ Connect the audio cable securely.
securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
The playback picture is ꢀ The disc is dirty.
ꢀ Clean the disc.
poor.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
The DVD player does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional code.)
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor of the DVD player.
ꢀ Point the remote control at the remote
sensor of the DVD player.
ꢀ The remote control is too far from the
DVD player.
ꢀ Operate the remote control within 16 ft
(5 m).
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
remote control and the DVD player.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
ꢀ Set the remote control codes of both
DVD player and Remote control to the
same setting.
ꢀ Remote control code is different
between the DVD player and Remote
control.
26
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 13).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Sanskrit
Danish
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
27
Country Code List
Enter the appropriate code number for the initial setting “Country Code” (See page 15).
Code Country
Code Country
Code Country
Code Country
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
LY
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
HN
HR
HT
HU
ID
IE
IL
IN
IO
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
US
UY
UZ
VA
VC
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VE
VG
VI
Jordan
Japan
Kenya
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
Cayman Islands
Kazakhstan
Laos
Lebanon
28
Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
AC 120V , 60 Hz
14W
17.3 X 3.2 X 16.2 inches (440 X 80 X 410 mm) (w x h x d)
11.2 lbs (5.1 kg)
Operating temperature
Operating humidity
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
System
Laser
Semiconductor laser, wavelength 650 nm
NTSC
Signal system
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
Video output
S-Video output
1 Vp-p 75 Ω, negative sync, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
Component Video output
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(CB/PB)/(CR/PR) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output (coaxial)
Audio output (optical)
Audio output (analog 2ch)
0.5 V (p-p), 75 Ω, RCA jack x 1
Optical connector x 1
2.0 Vrms , 600 Ω, RCA jack (L, R) x 2
Accessories
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control unit (RC5400VC) . . . . . . .1
Batteries (AAA size) . . . . . . . . . . . . . . . . .2
Warranty card (for USA) . . . . . . . . . . . . .1
Warranty card (for CANADA) . . . . . . . . . .1
User Guide . . . . . . . . . . . . . . . . . . . . . . .1
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
29
You can find your nearest authorized distributor or dealer on our website.
JAPAN
U.S.A.
Marantz Japan, Inc.
Marantz America, Inc.
Marantz Europe B.V.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
P/NO: 3834RS0062W
Printed in China
03/2003 MIT-lg 31AW851250
|