Getting started with
BCC950 ConferenceCam
Logitech for Business
Logitech BCC950 ConferenceCam
1
2
6
7
12
11
13
13
8
9
14
13
14
9
6
8
3
10
10
12
11
4
5
16
15
Know your product
1. Webcam
2. Autofocus lens
3. Eye-level stand
4. Speakerphone base
5. Speaker
7. Activity light
8. Volume up
9. Volume down
10. Mute
11. Hang up
12. Answer
13. Zoom
14. Pan
15. Power port
16. 3.5mm earphone jack
6. Tilt
3
Logitech BCC950 ConferenceCam
Contact
address
Contact
address
Contact
address
USB
Set up your product
1. Turn on computer.
5. Launch a video conferencing application.
2. Attach webcam to speakerphone base.
Use the stand to place the webcam closer
for eye-level conferencing. When attaching
or removing the webcam to the stand, first
disconnect the AC power.
3. Connect power adapter to speakerphone
base and AC outlet.
4. Connect the USB cable to a computer
USB port.
4
Logitech BCC950 ConferenceCam
Use your product
• VideoꢀUse Pan, Tilt, and Zoom to
adjust the image in the preview window
of your video conferencing software.
Press and release these controls for
incremental adjustment. Press and hold
for continuous adjustment. When live
video is streaming, the webcam’s blue
activity light is on.
– When using the ConferenceCam with
Skype on Windows® XP or Windows®
Vista, you must download and install
the ConferenceCam driver from www.
logitech.com/support/bcc950.
• Optional earphonesꢀPlug optional
earphones (not included with the
BCC950 ConferenceCam) into the
earphone jack for private calls.
• CautionꢀDo not manually rotate the
webcam (camera head). Doing so may
damage the unit.
• Speakerphone base activity lightꢀ
Blue: ConferenceCam is in an active call.
Blinking blue: A call is being received.
(The blue activity light on the
speakerphone base may not work in
some applications.)
• VolumeꢀUse Volume Up and Down to
adjust the volume.
• CallingꢀLaunch your video conferencing
software. Use Answer to pick up a call
and Hang up to end a call. Press the Mute
button to mute audio.
Red: Audio is muted.
Blinking red: A USB connection is being
made between the ConferenceCam and
a computer.
Usage notes:
– The Answer and Hang Up buttons may
not work in some video conferencing
software. Use your software to answer
and end a call.
– To enable the answer and hang up
features in Skype™, download and
install the Skype software plug-in
support/bcc950.
5
Logitech BCC950 ConferenceCam
Troubleshooting
ConferenceCam does not work
• Check the AC power connection.
Windows® 7 and Windows® Vista, go
to Start > Control Panel > Sound >
Recording tab. For Windows XP, go to
Start > Control Panel > Sounds and Audio
devices > Voice tab.
• Check the USB cable connection. Use
another USB port on your computer.
Connect directly to your computer. Do
not use a USB hub.
• Restart your video conferencing software.
• Check your router function and internet
connection. (For more information,
refer to your router or networking
documentation.) Test your Internet
connection speed. To learn how, go to
• If you are using the eye-level stand,
remove the stand from the webcam
and speakerphone base, and then
attach the webcam directly to the
speakerphone base.
Sound or video issues
• Specify the ConferenceCam as the
default input/output device in your
video conferencing software. (For
more information, refer to your video
conferencing software documentation.
• Adjust the volume with Volume Up and
Volume Down. Also check the volume
setting on the Windows® taskbar. Press
Mute to unmute the sound. Plugging
earphones into ConferenceCam mutes
sound through the speaker on the
speakerphone base.
Note: In many applications, the
ConferenceCam’s webcam, speaker,
and mic are listed separately. Each
are identified by the ConferenceCam’s
product name.)
• Adjust the recording (voice) level
using the Windows Control Panel. For
6
Logitech BCC950 ConferenceCam
• Specify the ConferenceCam as the default
input/output audio device for your
operating system:
Windows® Vista and Windows® 7
1. Go to Start > Control Panel > Sounds >
Playback tab.
Windows® XP
1. Go to Start > Control Panel > Sounds
and Audio devices > Voice tab.
2. Choose “BCC950 ConferenceCam
Audio.”
3. Click “Set Default,” and then click OK.
2. Choose “BCC950 ConferenceCam
Audio” in both the Voice playback and
Voice recording areas. Click OK.
4. Select the Recording Tab.
5. Choose “BCC950 ConferenceCam
Audio.”
3. Go to the Audio tab. Choose “BCC950
ConferenceCam Audio” in both the
Sound playback and Sound recording
areas. Click OK.
6. Click “Set Default,” and then click OK.
What do you think?
Please take a minute to tell us.
Thank you for purchasing our product.
United States
+1 646-454-3200
United Kingdom +44-(0)203-024-81 59
7
© 2012 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and
may be registered. Microsoft, Windows Vista, Windows, and the Windows logo are trademarks of the Microsoft group of
companies. Skype is a trademark of Skype or other related companies. Skype is registered in the United States Patent and
Trademark Office, and with the Trademark Offices of the countries of Australia, Finland, Benelux, Hong Kong, Israel, Japan,
Liechtenstein, New Zealand, South Korea, Switzerland, and Taiwan. All other trademarks are the property of their respective
owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is
subject to change without notice.
620-004226.002
|