®
CD AUDIO SYSTEM
WITH DIGITAL RADIO & BASS REFLEX
SPEAKERS
MODEL SL-328
OPERATING INSTRUCTIONS
DIGITAL RADIO WITH PRESETS
•
PLAYS MUSIC COMPACT DISCS
•
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY
•
RECEIVES AM/FM STEREO BROADCASTS
•
RECORDS CASSETTES FROM CD OR RADIO
•
AC POWER INDICATOR
•
LARGE BACKLIT LCD DISPLAY FOR CD & RADIO
•
PRESET GRAPHIC EQUALIZER SYSTEM
•
BASS REFLEX SPEAKER SYSTEM
•
PLEASE READ CAREFULLY BEFORE USE
IB-SL328-SY-WM-E-120801
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.
5. Do not connect FM antenna wire to any outdoor antenna.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CD’s.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the back of the set.
IB-SL328-SY-WM-E-120801
2
CONNECTING THE SPEAKERS AND ANTENNAS
Carefully unwind and stretch out the speaker wire on the back of each speaker
box and plug the right plug into Speaker Jack marked “ R ”, and the left plug into
Speaker Jack marked “ L ”.
FM ANTENNA
AM ANTENNA
SOCKET
AC CORD
AM LOOP
ANTENNA
Unwind the FM ANTENNA (thin wire) at the back of the set and straighten it out for FM
reception; for AM reception, please use the AM LOOP ANTENNA and plug its wire
into the AM ANTENNA SOCKET at the back of the set, then position the AM ANTENNA
on the top of the set for the best AM reception.
POWERING UP
Plug the AC POWER CORD into a 120V, 60Hz wall outlet. The AC POWER STANDBY
INDICATOR will be on. This indicator shows you that the set & outlet are OK.
AC POWER
STANDBY
INDICATOR
To a wall outlet
NOTE: One blade of
plug and outlet
is wider.
TIP
If the plug of the AC power cord does not match your outlet, do not force it.
Reverse it and try again. The plug is polarized and only fits one way into the wall
outlet.
IB-SL328-SY-WM-E-120801
3
REMOTE CONTROL
You can control the player with the provided REMOTE control.
1. MUTE
2. TAPE
3. BAND
1
2
3
4
5
6
8
9
10
11
12
4. CD REPEAT/RADIO PRESET
5. RADIO TUNING DOWN/CD BACKWARD SKIP
6. STOP
13
7. VOLUME DOWN
8. POWER
9. CD
7
14
10. RADIO
11. CD PROGRAM/RADIO STORE
12. RADIO TUNING UP/CD FORWARD SKIP
13. CD PLAY/PAUSE
14. VOLUME UP
Slide the battery cover to remove. Insert two size “AAA” batteries (not included)
correctly so that the + and - polarities match the polarity diagrams inside the
battery compartment.
NOTE:
Point the REMOTE control at the REMOTE SENSOR.
•
•
The functions of the buttons on the REMOTE control
are the same as the corresponding controls on the
main unit.
About half a year of normal operation can be expected
when using the alkaline batteries.
•
When the batteries are exhausted, the REMOTE
control will no longer operate the system. Replace
both batteries with new ones.
•
When the REMOTE control is not to be used for a long
•
time (2 months or more), remove the batteries to avoid
possible damage that may be caused by battery
leakage.
Avoid keeping the REMOTE control in extremely hot
or humid locations.
•
The REMOTE control’s operating distance is about
0.2m (8 inches) to 5m (16.5 feet) away from the
•
REMOTE SENSOR.
REMOTE SENSOR
IB-SL328-SY-WM-E-120801
4
CLOCK SETTING
3&5
NOTE: If the POWER switch is
ON and you want to set
the time, press the TAPE
switch first, and then
follow the listed steps to
set the clock.
2,4&6
Connect the AC power cord (see page 3).
Once the set is connected with the
AC power, the display will show as
right:
1
AM
HOUR MINUTE
Press the PROGRAM(STORE)
switch, the hour digits will flash for
10 seconds.
2
3
AM
Press
the
TIME/TUNING
switches to select the correct
hour time. Observe the AM & PM
indicators, advance the time 12
hours to change AM to PM.
AM
Press the PROGRAM(STORE)
switch to accept the hour time and
switch to minute setting.
4
5
AM
Press
the
TIME/TUNING
switches to select the correct
minute time.
AM
Press the PROGRAM(STORE)
switch again to complete clock
setting. The numbers will not
flash, but the colon “ : ” will flash,
indicating that the clock is set.
6
AM
IB-SL328-SY-WM-E-120801
5
PLAYING A CD
5
STANDBY
INDICATOR
1
6
3&4
2
Connect the AC power cord (see page 3).
Press the POWER switch, the AC
POWER STANDBY INDICATOR will
go off and the display will light up.
1
2
3
Press the CD switch, the display
will show six zeros “0”.
TRACK
Press the CD DOOR OPEN/CLOSE
button to open the CD DOOR and
place the disc in the CD
compartment. The label side of
the CD should face outward.
Close the CD DOOR by pressing
the CD DOOR OPEN/CLOSE
button again. The display will
show the total tracks on that CD
4
TRACK
T O T A L
(after a few seconds).
TRACKS
TOTAL PLAYING
TIME ON THE CD
Press the CD PLAY button.
The player will play all the
tracks (songs) once.
TRACK
5
6
TRACK
PLAYING TIME
Press the EQ switch to
choose different music
effects (CLASSIC, ROCK, POP
or flat).
POP
TRACK
IB-SL328-SY-WM-E-120801
6
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
CD DOOR
OPEN/CLOSE
TRACK
POWER
VOLUME +
VOLUME -
TIP
When CD play
is paused, the
elapsed playing
time will flash and
no music will play.
To
Press or Adjust
VOLUME + or VOLUME - button
Adjust the volume
Stop playback
STOP button
PAUSE button
To resume play,
press the PAUSE
button again, the
elapsed playing
The elapsed playing time will
flash during pause. Press again
to resume play after pause.
Pause playback
time
will
stop
flashing and music
will play.
Go to the next track
FORWARDS
BACKWARDS
Go back to the previous
track
TIP
If you bump the set
or table it is sitting
on, during CD play,
the music will stop
or skip for a few
seconds. This is
normal for this type
or
Locate a point in a
song
Press and hold down while
playing until you find the point.
Press the CD DOOR OPEN/
CLOSE switch (press STOP first).
Remove the CD
Press the POWER switch, the AC
POWER STANDBY INDICATOR
will go on.
Turn off the player
IB-SL328-SY-WM-E-120801
7
REPEAT PLAY
PLAYING CD SONGS (TRACKS) OVER AND OVER
You can play CD tracks over and over in normal or programmed play modes (see
page 9).
POWER
REPEAT
PROGRAM
GRAPHIC CD FUNCTION
EQUALIZER
SWITCH
1. Press the POWER switch, the AC POWER STANDBY INDICATOR will go off.
2. Press the CD switch.
3. Select the track by pressing
or
, and then press
.
4. Press the CD REPEAT button.
To repeat
Display shows
Press
a single track (song)
Press the REPEAT button twice
Press the REPEAT button once
“REPEAT” Flashing
“REPEAT” steady on
all the tracks (all songs)
programmed tracks
“REPEAT” steady
on (“MEMORY” also
on)
During programmed play, press
the REPEAT button once
To cancel Repeat Play
Press the REPEAT button until the “REPEAT” goes off in the display.
IB-SL328-SY-WM-E-120801
8
SELECTING YOUR OWN MUSIC PLAYING ORDER
(Programmed Play)
You can make a program of up to 20 tracks
in the order you want them to be played.
NOTE: Programming is only done during
stop mode.
POWER
PROGRAM
During STOP mode, press the
M
EMOR
Y
1
2
3
PROGRAM (STORE) button. The
TRACK
display will show ”,
“
“MEMORY” and “TRACK” will flash
in the display.
M
EMOR
Y
Press the SKIP/SEARCH buttons
TRACK
either
or
until the desired
track shows in the display.
M
EMOR
Y
Press the PROGRAM button. The
TRACK
display will show “
”.
Repeat steps 2&3 until all the
desired tracks are programmed.
4
5
M
EM
ORY
Press the PLAY button to start
programmed play. “MEMORY” and
“TRACK” will be steady in the
display, the track number being
played will show in the display.
TRACK
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button in programming mode.
IB-SL328-SY-WM-E-120801
9
LISTENING TO THE RADIO
4
1
6 3 2
Connect the AC power cord (see page 3).
Press the POWER switch, the AC POWER
STANDBY INDICATOR will be off.
1
2
3
Press the RADIO switch.
Press the BAND switch to choose the
proper band (AM or FM ) that you want.
Tune into the station you prefer using
the TUNING UP or DOWN button.
Each time the button is pressed, the
frequency changes. Keep the button
pressed, the station will change rapidly
(automatic tuning), release the button
and it will stop at the next strong station.
4
STEREO
“STEREO” will light up when receiving FM
5
6
Stereo broadcasts.
FM
M
H
z
Press the GRAPHIC EQUALIZER button
to choose different music effects
(CLASSIC, ROCK, POP or flat).
IB-SL328-SY-WM-E-120801
10
PRESETTING RADIO STATIONS
Allows you to store your favorite stations for quick one button tuning.
3
2&4
Connect the AC power cord (see page 3).
Follow Steps 1 to 4 (LISTENING TO
THE RADIO on the previous page)
to select a station.
1
Press the PROGRAM (STORE)
switch, “CH” will show and
“MEMORY” will flash in the display
for about 5 seconds.
STEREO
STEREO
STEREO
2
CH
M
H
z
FM
While the “MEMORY” is flashing,
press the PRESET (REPEAT)
button to choose a memory location
(01-20).
3
CH
M
H
z
FM
Press the PROGRAM (STORE)
button again to confirm, the station
now broadcasting is stored into that
CH
4
M
H
z
FM
preset memory location. “MEMORY”
disappears from the display.
NOTE: Steps 2-4 should be done quickly.
Repeat the above steps to store other
19 stations into memory.
5
TIP: UP TO 20 AM AND 20 FM STATIONS CAN BE STORED INTO THE
PRESET MEMORY LOCATIONS.
IB-SL328-SY-WM-E-120801
11
LISTENING TO THE PRESET STATIONS
(after you programmed them)
Connect the AC power
cord (see page 3).
Press the POWER switch, the
dial will light.
1
2
3
Press the RADIO switch.
Press the AM/FM BAND
switch to select the desired
band.
1
4
Press the PRESET (REPEAT)
switch several times to
choose a memory location
(01-20). You will receive the
station you stored into that
preset memory location.
4
3
2
USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS
Press or Adjust
To
VOLUME + or
VOLUME - switch
1. Adjust the volume
POWER switch
EQ switch
2. Turn off the radio
2
3. Choose different
sound effect
1
3
TO IMPROVE BROADCAST RECEPTION
Unwind and stretch out the FM antenna for FM or FM Stereo. Move the AM
RIG HT LEFT
ANTENNA for AM.
SPEA KER
FM ANTENNA: Unwind it
and stretch out for better
FM reception
AM ANTENNA: Move it for
better AM reception
12
IB-SL328-SY-WM-E-120801
PLAYING A TAPE
1
2
INSERT THIS WAY
4
3
Connect the AC power cord (see page 3).
Press the POWER switch,
the dial will light up.
1
2
Press the TAPE switch.
Press the STOP/EJECT
button to open the tape
compartment and insert a
recorded tape as shown.
3
4
5
Close the door.
Press the PLAY button.
The player turns on and
starts playing.
When the set finishes
playing this side of the tape,
the set will stop. To hear
the other side of the tape,
flip the tape over, then insert
and press PLAY.
AUTO STOP
Press the EQ switch to choose different
music effect (CLASSIC, ROCK, POP or flat).
6
IB-SL328-SY-WM-E-120801
13
USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS
AC POWER
STANDBY
INDICATOR
MUTE
INDICATOR
VOLUME +
& VOLUME -
EQUALIZER
HEADPHONE
JACK
PLAY
STOP/EJECT
PAUSE
REWIND & FAST FORWARD
To
Press or Adjust
VOLUME + or VOLUME - switch
Adjust the volume
Get different sound effect
Stop playback
EQ switch
STOP button
FAST FORWARD button or
REWIND button
Fast forward or rewind
the tape
PAUSE button
Press again to resume play after
pause.
Pause playback
Eject the cassette
STOP button
To enjoy the music
without disturbing others
(Headphones are not
included)
Insert your headphone plug into
the HEADPHONE Jack
Press the MUTE button on the REMOTE,
the MUTE INDICATOR will turn on, press
it again to restore sound and the MUTE
INDICATOR will go off.
To turn off the sound instantly
To shut the player off
Press the POWER switch to OFF,
the AC POWER STANDBY
INDICATOR will be go on.
IB-SL328-SY-WM-E-120801
14
RECORDING ON A TAPE
INSERT THIS WAY
3
1
Connect the AC power cord (see page 3).
Press the STOP/EJECT button
to open the tape compartment
and insert a blank tape. Select
the program source (AM, FM or
CD) you want to record.
1
2
To record from the CD player,
insert a CD and follow the steps
to play a CD (see page 6).
To record from a radio, press
the RADIO switch, select AM or
FM band and tune into the
station you want (see page 10).
Press the RECORD button to
start recording. (The PLAY
3
4
button
is
depressed
automatically.)
To hear what you recorded,
press the TAPE switch, then
press REWIND and PLAY.
IB-SL328-SY-WM-E-120801
15
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
TIP
• To
erase
a
recording, just start
a new recording,
and the old one is
a u t o m a t i c a l l y
replaced.
STOP/EJECT PAUSE
Press or Adjust
To
STOP/EJECT button
Stop recording
Pause recording
PAUSE button
Press the button again
to resume recording.
Turn off the player
Press the STOP/EJECT
button and press the
POWER switch to off, the
AC POWER STANDBY
INDICATOR will go on.
NOTE: If the PLAY button pops up, your tape may
have reached the end, reverse the tape or
press REWIND.
IB-SL328-SY-WM-E-120801
16
PRECAUTIONS
On Safety
On Operation
As the laser beam used in the CD
If the player is brought directly from a
•
•
player section may be harmful to the
eyes, do not attempt to disassemble
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the player has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.
the cabinet.
Refer servicing to
qualified personnel only.
Should any solid object or liquid fall
into the player, unplug the player, and
have it checked by qualified personnel
before operating it any further.
•
On Placement
This CD player is designed to be
•
Do not leave the player in a location
played on
a
stable no vibration
•
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.
position. If you bump the set or table
it is sitting on during CD play, the
music will stop or skip for
a few seconds. This is normal for this
type of player.
Do not place the player on an inclined
or unstable place.
•
If you have any questions or problems
concerning your player, please contact
our customer service department at
1-800-315-5885.
(Monday - Thursday 09:00 AM - 05:00 PM,
Friday 09:00 AM - 01:00 PM EST)
•
Do not place anything within 1 inch of
•
the back of the cabinet. The
ventilation holes must not be covered
for the player to operate properly and
prolong the life of its components.
If the player is left in a car parked in
•
the sun, be sure to choose a location
in the car where the player will not be
subjected to the direct rays of the
sun.
Since a strong magnet is used for the
•
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the player to
prevent possible damage from the
magnets.
IB-SL328-SY-WM-E-120801
17
PRECAUTIONS (continued)
Notes on CDs
Notes on Cassettes
Before playing, clean the CD with a
Break off the cassette tab from side A
•
•
cleaning cloth. Wipe the CD from the
center out.
or B to prevent accidental recording.
Side A
Do not use solvents such as benzene,
•
Tab for side A
Tab for side B
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
Do not expose the CD to direct
To record on a tape with its tab broken
off, cover the respective tab hole for
side A or B with adhesive tape.
•
•
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car.
The use of a cassette with more than
•
90 minutes of play time is not
recommended except for long
continuous recording or playback.
Do not stick paper or stickers on the
CD, nor scratch the CD.
•
To reduce the chances of tape
•
After playing, store the CD in its case.
jamming or tangling, you should check
that there are no loose layers of tape
visible through the cassette center
window. If any, tighten these loose
layers of tape using a pencil before
inserting the cassette into the set.
•
If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking
error or skipping.
IB-SL328-SY-WM-E-120801
18
MAINTENANCE
Cleaning the Lens
Notes for Storing
Cassette Tapes
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
1. Do not put a tape near a magnetic
field, such as a TV, or speaker.
Magnetic fields may reduce the tape
sensitivity or even erase the
recording.
2. Do not store tape for any length of
time in a hot, moist or dusty place.
Cleaning the Tape Heads
Wipe the heads, the pinch roller and
the capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
Cleaning the Cabinet
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder, or solvent, such as alcohol or
benzene.
CAPSTAN
COTTON SWAB
ERASE HEAD
RECORD/PLAY BACK HEAD
PINCH ROLLER
NOTE: In order to see and clean the
head, you may have to press
PLAY first.
IB-SL328-SY-WM-E-120801
19
TROUBLE SHOOTING
Problem
Remedy
Connect the AC power cord to a wall
outlet securely.
•
The power is not on.
Make sure to press the right function
switch as you want.
•
Adjust the volume.
Unplug the headphones when listening
through speakers.
•
•
“
” flashes in the
Insert the CD with the label side up.
•
•
•
•
•
display even when a CD is
in place.
Make sure that the CD compartment is
closed.
Place the CD with the label side up.
Clean the CD.
Take out the CD and leave the CD DOOR
open for about an hour to dry moisture
condensation.
CD does not play.
Make sure the CD switch is pressed.
•
•
Clean the CD, or replace it if the CD is
badly damaged.
The sound drops out.
Place the player in a location free from
vibration.
•
•
•
FM sound is weak or has
poor quality.
Unwind the FM antenna and stretch out
for better FM reception.
Use the included AM loop antenna and plug
its wire into the AM ANTENNA SOCKET at
the back of the set, then rotate the AM
antenna for better AM reception.
AM is weak
The RECORD button does
not function/The tape does
not play.
Make sure the safety tab on the cassette
is in place.
Make sure the TAPE switch is pressed.
•
•
The tape does not erase
completely.
Clean the erasing head (see page 19).
•
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette
is in place.
•
•
The tape does not record.
The sound is weak/The
sound quality is poor.
Clean the heads, pinch roller and capstan
(see page 19).
•
•
Cassette PLAY button pops
up.
The tape has reached its end. Remove it,
flip to the other side and re-insert.
20
IB-SL328-SY-WM-E-120801
SPECIFICATION
General Description
Power source:
AC 120V, 60Hz 25 Watts
2 - 4” 4 ohm woofers, and
Speakers (2 ways):
2 - 2” 4 ohm tweeters with crossover
5.0W/channel
Output power:
Main set
1
10”
11”
6.6LBs
Speaker
1
Dimensions (approx.):
Width:
Depth:
Height:
Weight:
6
/ ”
5
8
/ ”
4
2
3
/ ”
4
4
3
10 / ”
4.4LBs
CD Section
Plays disc type:
Laser wavelength:
Tracking method:
Any normal CD used in portable players
760 - 800 NM
3 - spot error detection
3.86 mm lens
Frequency response: 50Hz - 15kHz +1/-2 dB
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs). This set
will play CDRW encoded discs.
Tape Recorder Section
Frequency response: Standard normal bias cassette tape
70Hz - 10kHz
Radio Section
Frequency range:
87.5 - 108 MHz
FM:
AM: 530 - 1710 kHz
LENOXX reserves the right to make design and specification changes for
product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR
LACQUER FINISH.
For customer service
Dial 1-800-315-5885
(MONDAY - THURSDAY 09:00 AM - 05:00 PM, FRIDAY 09:00 AM - 01:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
© 2001 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
IB-SL328-SY-WM-E-120801
21
|