DetectorBaseXP95/Discovery
ASR-45681-242 with Relay Output
• Suitable for automatic detectors in
ADM loop technology with
Apollo/Discovery protocol
• Relay output with dry change-over
contact
• Screw terminals for secure
connection of multiple wires
• Easy addressing by means of
code card
• Mechanical theft protection can be
activated
Description
The Detector Relay Base ASR-45681-242 accommoda- The address is selected by means of a code card in the
tes automatic fire detectors Series XP95 and Discovery base. Therefore the detector can be changed without
for use in ADM loops with Apollo/Discovery protocol. additional tools.
Due to its robust multi-wire screw terminals, the detec-
tors can be wired with ease, thus achieving a secure The base has been designed for surface mounting in
and durable connection.
dry rooms. For special applications a range of acces-
In addition, a relay output with a dry change-over contact sories (for moist room, false ceiling or flush installation)
is integrated into the detector base. The relay output is is available.
activated through the alarm activation of the inserted A mechanical theft protection of the detector can
detector and remains active until the alarm is reset on optionally be activated at the detector base.
the fire detection control panel.
Specifications
Operating voltage
Current consumption
Contact rating
Ambient temperature
Relative humidity
Dimensions ø × H
Colour
Supply through loop voltage
max. 1µA (quiescent), 40µA (active)
1A/30VDC
-20°C to +70°C
10 – 95% (no condensation)
100 × 24 (mm)
white
Weight
100g
Order number
Order name
246037
Detector Relay Base/Anal./XP95/Disc/Apo ASR-45681-242
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
ASR-45681-242_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|